Thermal Conductive Ceramic Sheet

Thermal conductivity: 25 (W/M-K)

Bending strength: 400 (MPa)

Ingredient content (≥ 96%)

Product Application: Mainly used in high-power equipment such as IMOS tubes, IGBT surface mounted thermal insulation, high-frequency power supplies, communications, mechanical equipment, high current, high voltage, high temperature, etc.

Main features:

Physical properties: high insulation, resistance to electrical breakdown, high temperature resistance, wear resistance, high strength;

Fire rating: US military standard MIL-F-51058 (highest level);

Certification status: Natural organic matter, EU exempted product, no need to certify material;

Voltage and temperature resistance: Ideal thermal insulation material for high-voltage and high-frequency equipment below 1600 degrees Celsius.

Main applications:

AI203 is mainly used in high-power devices and ICMOS tubes. IGBT surface mounted thermal insulation, high-frequency power supply, communication, mechanical equipment, high current, high voltage, high temperature and other product components that require thermal insulation and heat dissipation.

ZrO2 is mainly used in zirconium bricks, zirconium tubes, crucibles, etc. for grinding materials, refractory materials, and precious metal smelting.

Performance characteristics:

High hardness, corrosion resistance, high electrical insulation performance, excellent wear resistance, high thermal conductivity, and high temperature resistance.

Lightweight, high-density, and widely applicable.

Special note:

1. The material of the product itself is ceramic, which is a fragile item. The advantage of the product is its excellent thermal conductivity and insulation performance, but the disadvantage is that its toughness is not good enough and it is prone to breakage.

2. The product needs to be handled with care during transportation and use.

During the production and assembly process of perforated ceramic plates, the recommended torque for M3 screw electric screwdriver locking screws is 3.5-5.0 KGF CM, The smaller the product size, the smaller the torque it can withstand.

4. It is normal for products supplied in bulk to have yellow spots, convex spots, concave spots, and slight notches<0.5mm on all four sides. Dark cracks are considered serious defects.

If the customer has strict requirements for the appearance of the product, they can communicate separately with the business personnel and manual selection is needed. (Note: Costs may increase)

Product specifications:

Regular model: TO-220,TO-3P,TO-264,TO-247

Conventional thickness: 0.28mm~3mm, other thicknesses can be processed and customized.

Conventional sizes: 14mm * 20mm, 17mm * 22mm, 20mm * 25mm, 22mm * 28mm, 22mm * 30mm, 50mm * 50mm, 114mm * 114mm, 139mm * 190mm, etc; Other non-standard products can be customized with drawings for processing.

Product Performance Parameter Table